 |
Battery Quick Connect (mates to battery) |
These quick connect battery connectors mate to any of our battery packs. Simply connect to your unregulated power input on your motor controller, microcontroller, or other electronics.
|
Model Number: BATC-01
Price: $2.50
|
|
|
|
Model Number: USBC-02
Price: $9.95
|
|
|
|
 |
Wiring Harness - RC Receiver Power Cable |
These heavy duty wiring harnesses are perfect for your small robot. The small connector connects to an RC receiver like the Spektrum radios, and the other end is stripped, but not tinned for screw terminal use. |
Model Number: WH-04
Price: $4.95
On Sale For: $4.46
|
|
|
|
 |
Wiring Harness - Battery Connector |
These heavy duty wiring harnesses are perfect for your small robot. The quick connect end mates to our NiMH battery packs, and the other end is stripped, but not tinned for screw terminal use. |
Model Number: WH-01
Price: $4.95
On Sale For: $4.46
|
|
|
|
 |
Wiring Harness - Wall Pack Connector |
These heavy duty wiring harnesses are perfect for your small stationary robot. The 5.5mm x 2.1mm connector mates to our 6vdc 2amp wall packs, and the other end is stripped, but not tinned for screw terminal use. |
Model Number: WH-02
Price: $4.95
|
|
|
|
 |
Wiring Harness - 9vdc Battery Connector |
These heavy duty wiring harnesses are perfect for your small robot. The battery connect end mates to a standard 9vdc battery, and the other end is stripped, but not tinned for screw terminal use. |
Model Number: WH-03
Price: $4.95
|
|
|
|
 |
Servo "Y" Adapter Cable |
Easily control two servos from the same channel. Works with RC receivers or servo controllers.
|
Model Number: SYA-01
Price: $1.95
On Sale For: $1.75
|
|
|
|
 |
Servo Extender Cable - 6" |
Easily extend the distance a servo can be from the control electronics. Works with RC receivers or servo controllers. Remove the pins and it becomes a female to female cable for the PING or other three pin device.
|
Model Number: SEA-01
Price: $1.95
|
|
|
|
 |
Servo Extender Cable - 12" |
Easily extend the distance a servo can be from the control electronics. Works with RC receivers or servo controllers. Remove the pins and it becomes a female to female cable for the PING or other three pin device.
|
Model Number: SEA-02
Price: $1.95
|
|
|
|
 |
Servo Extender Cable - 24" |
Easily extend the distance a servo can be from the control electronics. Works with RC receivers or servo controllers. Remove the pins and it becomes a female to female cable for the PING or other three pin device. |
Model Number: SEA-03
Price: $1.95
|
|
|
|
Model Number: SC-01
Price: $1.95
On Sale For: $1.75
|
|
|
|
 |
Data Cable - 8" |
Easily connect a 0.1" spaced connection to a 0.2" spaced connection, such as when connecting a Serial Servo Controller to our Bot Board II carrier. |
Model Number: DC-01
Price: $1.95
|
|
|
|
 |
Data Cable (3 Circuit) - 8" |
This cable is used to connect signal lines to a peripheral device. It can be used for any 0.1" spaced header such as the Bot Board. The cable is three circuits, violet, blue and yellow. |
Model Number: DC-02
Price: $1.95
On Sale For: $1.80
|
|
|
|
 |
Power Cable - 8" |
This cable is used to connect power to a peripheral device. It can be used for any 0.1" spaced header such as the Bot Board. The cable is one pair, red and black. |
Model Number: PC-01
Price: $1.95
On Sale For: $1.75
|
|
|
|
 |
Sharp GP2D12 IR Cable - 8" |
This cable makes it easy to use the Sharp GP2D12 Infrared Sensor. It is prewired with the JST connector on one end, and the standard 0.1" spaced connector on the other. The end terminates with a power and data connection. These can be plugged into the Bot Board II for immediate use. The cable is three circuits, black, red, and yellow. |
Model Number: SIRC-01
Price: $1.95
|
|
|
|
 |
Gearhead Motor Connection Wire |
These heavy duty wires are perfect for our GHM-01 thru GHM-13 motors, and PGHM-01 thru PGHM-03. The stake-on ends push onto the motor terminals, and the other end is stripped but not tinned for screw terminal use. |
Model Number: MW-01
Price: $1.95
|
|
|
|
 |
PS2 Controller Cable Kit |
With two analog joysticks and 16 buttons the PS2 controller makes a great robot controller. This is an ultra-lightweight do-it-yourself cable kit to make it easy to connect the game controller to your favorite microcontroller. PS2 receiver not included.
|
Model Number: PS2DIY-KT
Price: $4.95
|
|
|
|
 |
USB-to-Serial Adapter Cable |
FTDI USB-to-serial adapter cable. Uses the FT232R chip. Drivers available for download here. This is the fastest and most stable USB-to-serial cable available. It's made by the same place that makes the FTDI chipset and has been proven to work well with all of our products.
Drivers: http://www.ftdichip.com/Drivers/VCP.htm
|
Model Number: USB2S-01
Price: $17.81
|
|
|
|
Model Number: DB9-02
Price: $4.95
|
|
|
|
Model Number: USBC-01
Price: $4.95
On Sale For: $4.46
|
|
|
|
 |
Nylon Wire Tie - 3" (100) |
These nylon wire ties are perfect for tidying up the loose wires on your robot. Sold in packs of 100. |
Model Number: NWT-01
Price: $2.95
|
|
|
|
 |
Nylon Wire Tie - 7" (100) |
These nylon wire ties are perfect for tidying up the loose wires on your robot. Sold in packs of 100. |
Model Number: NWT-02
Price: $3.95
|
|
|
|
