EH3-R Add-On Decks Assembly Guide
Last modified by Eric Nantel on 2023/01/26 10:31
| EH3-R
Add-On Decks Assembly Guide.
Updated 05/25/2006. Safety first! Wear eye protection and never touch a powered robot! Note: Do not use Loctite or thread locks on the assembly. They are not necessary and may cause damage to the Lexan. |
 Image of DD 3DOF Leg. |
||||
| Step
1. Attach four 1" Hex Standoffs to the smaller panel as shown, using four 4-40 x 3/8" screws.
|
 Figure 1. |
||||
| Step
2. Attach six 1" Hex Standoffs to the larger panel as shown, using six 4-40 x 3/8" screws.
|
 Figure 2. |
||||
| Step
3. Connect the panels together as shown, using four 4-40 x 3/8" screws.
|
 Figure 3. |
||||
| Step
4. Drop the servo in from the top and secure in place with four snap rivet fasteners.
|
 Figure 4. |
||||
| Step
5. Use six 4-40 x 3/8" screws to attach the decks to the EH3-R.
|
|
||||
