Check out our Servo Erector Set!




Servo MXL Timing Belt Pulley - 32 Tooth Futaba Servo MXL Timing Belt Pulley - 32 Tooth

Imagine the possibilities of being able to attach an MXL Timing Belt to a servo. Gear reduction, linear actuation, load sharing, and much more can easily be acomplished. MXL (Miniature Extra Light) Pitch is 0.08". Pitch diameter is 0.815". Overall diameter is 1.0". Belt thickness of 1/8", 3/16", and 1/4" will work. Fits the Futaba spline.
Model Number: MXLS-02
Price: $3.95 
Quantity:   

Hitec Spline Metal Servo Horn (Tapped) Futaba Spline Metal Servo Horn (Tapped)

This high quality metal servo horn has the standard Servo Erector Set hole pattern and is tapped to accept 2-56 screws. It has not been tested on metal final gears.
Model Number: FMSH-01
Price: $3.25
 On Sale For: $2.68 
Quantity:   

Hitec Spline Metal Servo Horn (Tapped) Hitec Spline Metal Servo Horn (Tapped)

This high quality metal servo horn has the standard Servo Erector Set hole pattern and is tapped to accept 2-56 screws. It fits on all Hitec resin, carbonite, and metal final gears.
Model Number: HMSH-02
Price: $3.25 
Quantity:   

Low Profile Axis Gear Set (for Servo and SES) Low Profile Axis Gear Set (for Servo and SES)

Acetal gear set from our Low Profile Axis kit.
Model Number: LPAGS-01
Price: $8.55 
Quantity:   

Servo MXL Timing Belt Pulley - 32 Tooth Hitec Servo MXL Timing Belt Pulley - 32 Tooth

Imagine the possibilities of being able to attach an MXL Timing Belt to a servo. Gear reduction, linear actuation, load sharing, and much more can easily be acomplished. MXL (Miniature Extra Light) Pitch is 0.08". Pitch diameter is 0.815". Overall diameter is 1.0". Belt thickness of 1/8", 3/16", and 1/4" will work. Fits the Hitec spline.
Model Number: MXLS-01
Price: $3.95 
Quantity:   

Servo Tire and Wheel - 2.63 Servo Tire and Wheel - 2.63" x 0.35" (pair)

Diameter = 2.63"
Width = 0.35"
Motors = Any Hitec standard servo spline
Model Number: SRVT-01
Price: $7.50 
Quantity:   

Sticky Servo Tire - 2.75 Sticky Servo Tire - 2.75"D x .38"W (pair)

Diameter = 2.75"
Width = 0.38"
Motors = Any Hitec standard servo spline
(Tire rims sold separately.)
Model Number: SRVT-02
Price: $7.50 
Quantity:   

Injection Molded Servo Hinge for Ball Bearing Two Pack - Standard (HD) Injection Molded Servo Hinge for Ball Bearing Two Pack - Standard (HD)

High quality, heavy duty injection molded hinges attach to the bottom of a servo directly inline with the output shaft. Useful for making custom parts that do not require ASB-04 brackets. Sold in a 2-pack. Fits standard size servos. Spacing from servo horn to servo hinge is 1.875". Note, does not include ball bearings, they are included with the "C" brackets, or available separately. Please note that this product will not work with a HS-485 servo and a "C" bracket, as the servo is too tall.
Model Number: PSH-04
Price: $5.95 
Quantity:   

Injection Molded Servo Hinge Two Pack - Micro Injection Molded Servo Hinge Two Pack - Micro

High quality injection molded hinges attach to the bottom of an HS-81 or HS-85 servo directly inline with the output shaft. Useful for making custom hinges spaced 1.5" apart. Sold in a 2-pack. Fits micro size servos only.
Model Number: PSH-02
Price: $3.95 
Quantity:   

Injection Molded Servo Hinge Two Pack - Standard Injection Molded Servo Hinge Two Pack - Standard

High quality injection molded hinges attach to the bottom of a servo directly inline with the output shaft. Useful for making custom parts that do not require ASB-04 brackets. Sold in a 2-pack. Fits standard size servos. Used with ASB-03 and ASB-05 only. Spacing from servo horn to servo hinge is 1.875".
Model Number: PSH-01
Price: $3.95 
Quantity:   

Injection Molded Servo Hinge Two Pack - Standard (HD) Injection Molded Servo Hinge Two Pack - Standard (HD)

High quality, heavy duty injection molded hinges attach to the bottom of a servo directly inline with the output shaft. Useful for making custom parts that do not require ASB-04 brackets. Sold in a 2-pack. Fits standard size servos. Used with ASB-03 and ASB-05 only. Spacing from servo horn to servo hinge is 1.875".
Model Number: PSH-03
Price: $5.95
 On Sale For: $4.61 
Quantity:   

Little Grip Kit (no servos) Little Grip Kit (no servos)

Little Gripper is a perfect addition to an arm or robot base. Made from injection molded ABS. Gripper opens to 1.3" and rotates 180 degrees.
Model Number: LG-NS
Price: $15.99 
Quantity:   

Base Rotate Kit (no servos) Base Rotate Kit (no servos)

The Base Rotate Kit is perfect for rotating a large mass. It can easily support 5lbs of weight, and has five 6mm bearings to reduce the friction. It's injection molded from ultra strong ABS plastic. It fits the HS-422, HS-485, and HS-645 servos. Others have not been tested.
Model Number: BR-NS
Price: $19.95 
Quantity:   

Aluminum Servo Bracket Two Pack Aluminum Servo Bracket Two Pack

High quality black anodized aluminum brackets make easy work of mounting standard size servos. Sold in a 2-pack.
Model Number: ASB-01
Price: $5.95 
Quantity:   

E-Z Aluminum Servo Bracket (Two Pairs) E-Z Aluminum Servo Bracket (Two Pairs)

Here's an ingenuous way to horizontally mount standard servos that requires no screws. Made from high quality anodized aluminum "L" brackets and nylon snap rivets. It only requires you to drill some 11/64" (4.35mm) holes. Then it's a simple matter of pushing in the rivets. Literally mount servos in seconds. Includes enough materials to mount 2 standard size servos.
Model Number: ASB-02
Price: $8.95 
Quantity:   

Servo Attachment Hardware Bag (Single) Servo Attachment Hardware Bag (Single)

Screws, nuts, and washers to attach a servo to a Multi-Purpose Servo Bracket (ASB-04 or ASB-04B). Includes enough hardware for one servo.
Model Number: HDW-02
Price: $1.50 
Quantity:   

Nylon Snap Rivet Fasteners (25) Nylon Snap Rivet Fasteners (25)

These useful snap rivet fasteners make mounting servos simple. The fasteners fit all size servos.
Qty = 25
Weight = .0074 oz.
Model Number: NSRF-01
Price: $3.95 
Quantity: