Home
|
What's New
|
Contact
|
About
|
Safety
|
Forum
|
Account
|
Shopping Cart
Robotic Arms
Bipeds
Quadrapods
Hexapods
A4WD1 Rovers
Sumo Robots
Johnny 5
Tracked Vehicles
Servo Erector Set
Servos, Access.
Mechanical
Hardware
Electronics
Batteries & Supplies
Cables
Motors, Wheels
Tracks
Robot Books
Misc Stuff
Software
Search:
Check out our BRAT!
Introducing the Lynxmotion Track System
After spending months searching for a decent track system, we gave up and decided to make our own. These polypropylene / rubber tracks are perfect for your small robot project. They are rugged, lightweight, reliable. These tracks will not slip from the sprockets. They are extremely smooth and quiet and have very little friction. We will be offering several tracked vehicles this fall, but till then we are making the components available separately.
Assembly Guides
Videos
2" Tracks on Rover.
Aluminum Hex Standoffs (F/F) - 1-1/2" x 1/4" (4-40 Tapped) (10)
Description
-
Qty = 10
1-1/2" = .104 oz.
Part# [ AHS-04 ]
$6.95 USD
Track - 2" Wide x 21 links ~23" (single)
Description
-
Rugged polypropylene links. Rubber has a Shore A hardness of 45. Pitch is 1.07", and width is 2". These links are very easy to interconnect, but do require some assembly.
Part# [ TRK-01 ]
$24.95 USD
Track - 3" Wide x 21 links ~23" (single)
Description
-
Rugged polypropylene links. Rubber has a Shore A hardness of 45. Pitch is 1.07", and width is 3". These links are very easy to interconnect, but do require some assembly.
Part# [ TRK-02 ]
$38.95 USD
Track Sprocket - 6 Link (Pair)
Description
-
Works with our Universal 6mm Hub (
HUB-02
) and 4mm Hub (
HUB-03
).
Sprocket diameter with tracks is 2.75"
Pitch diameter (calculated, not measured) 2.14"
Designed to be used back to back for a dual sprocket config.
Part# [ SPRK-01 ]
$7.95 USD
Track Sprocket - 9 Link (Pair)
Description
-
Works with our Universal 6mm Hub (
HUB-02
) and 4mm Hub (
HUB-03
).
Sprocket diameter with tracks is 3.75"
Pitch diameter (calculated, not measured) 3.13"
Designed to be used back to back for a dual sprocket config.
Part# [ SPRK-02 ]
$9.95 USD
Passive Idler Hub - 2" (Pair)
Description
-
These passive idler hubs fit our 2" tracks, and can be used with either the 6 or 9 link sprockets. They are designed to fit perfectly between two panels separated by 1.5" standoffs (
NHS-04
).
Part# [ HUB-11 ]
$12.95 USD
Universal Hub - 6mm (pair)
Description
-
High quality universal hub.
Works with any motor with a 6mm shaft.
For Green Dot Sumo (
TSR-02
), (
TSR-03
), (
TSR-04
), Ant/Beetle (
BBT-01
) tires.
Part# [ HUB-02 ]
$8.00 USD
Universal Hub - 4mm (pair)
Description
-
High quality universal hub.
Works with any motor with a 4mm shaft.
For Green Dot Sumo (
TSR-02
), (
TSR-03
), (
TSR-04
), Ant/Beetle (
BBT-01
) tires.
Part# [ HUB-03 ]
$8.00 USD
Nylon Bushings for Track (10)
Description
-
Qty = 10
1-5/16" = .104 oz.
Part# [ NB-01 ]
$4.95 USD
Passive Idler Hub - 3" (pair)
Description
-
These passive idler hubs fit our 3" tracks, and can be used with either the 6 or 9 link sprockets. They are designed to fit perfectly between two panels separated by 2.5" standoffs.
Part# [ HUB-13 ]
$14.95 USD
Home
|
What's New
|
Contact
|
About
|
Safety
|
Forum
|
Account
|
Shopping Cart
Sales:
309-353-1816
Support:
309-353-2777
Fax:
309-353-2775
sales@lynxmotion.com
support@lynxmotion.com
tech@lynxmotion.com
Lynxmotion, Inc.
PO Box 818 Pekin, IL 61555-0818
All web content © by Lynxmotion, Inc. 2009