Products
   Robotic Arms
   Bipeds
   Quadrapods
   Hexapods
      AH3-R
      BH3-R
      CH3-R
      Phoenix
      BH3
      MH2
   A4WD1 Rovers
   Sumo Robots
   Johnny 5
   Tracked Vehicles
   Servo Erector Set
   Servos, Access.
   Mechanical
   Hardware
   Electronics
   Batteries & Supplies
   Cables
   Motors, Wheels
   Tracks
   Robot Books
   Misc Stuff
   Software
Information
Distributors

  Search:
 


Check out our BRAT!













About the Phoenix Hexapod Walking Robot
The Phoenix Hexapod Robot has a more natural looking, more articulate leg and body design. The three DOF (degree of freedom) leg design means this robot can walk in any direction! The robot has been designed to use 18 Hitec HS-645 servos for the legs. The kit includes everything you need to build the robot mechanics with the exception of 6 x ASB-04 pairs. In addition you will need Servos, Electronics and Batteries. The mechanical design was inspired by Kåre Halvorsen who goes by Zenta on our forum. This is quite possibly the nicest looking, best performing, commercially available hexapod out there.

The Mechanics
The robot is made from waterjet cut 6061 T6 aluminum components that are either bright dip Blue or Red anodized or jet black anodized. The Tibia and Femur parts are made from 0.125" thick material, and the chassis parts are made from 0.063" thick material. Note, this robot, as cool looking as it is, does not have the payload carrying capability of the other hexapods available from Lynxmotion. There is a penalty for pivoting the joints on the servo output shaft alone.

Controlling the Robot
The Phoenix robot is a complex walker. We have pre-written programs available for PS2 control using the SSC-32, Bot Board II, and BASIC Atom Pro. Programs and instructions are available in the Complete Phoenix Tutorial. A list of required components is included in the tutorial. Alternately, it can be controlled with our Visual Sequencer (SEQ-01), but it can be tedious to create large sequences for so many servos. Kåre Halvorsen has written a program to automate the process of creating complex sequences. His work has been outlined here. Jeroen Janssen (Xan on our forum) has submitted some very impressive BASIC Atom Pro code for Phoenix PS2 control, available here.

Powering Options
The robot is compatible with the following batteries and chargers.
  Chargers
    > NiCad & Ni-MH Universal Smart Charger (USC-01)
  Batteries
    > 6.0 Volt Ni-MH 1600mAh Battery Pack (BAT-03)
    > 6.0 Volt Ni-MH 2800mAh Battery Pack (BAT-05)

Important!
To keep costs down we are not providing printed Assembly Guides. They are provided online, so you will need to print them when you order the kits. By providing the Assembly Guides online we can provide more detailed and up to date information than the old hardcopy method allowed.

Isometric Image.

Front View.

Curled up.
 

Assembly Guides
& Tutorials

Videos

Projects

Image Gallery

Specifications


Phoenix Combo Kit for Bot Board/SSC-32/BAP28 and PS2 Controller (Black)
Description -
  • Powerful Bot Board/SSC-32/BAP28; prewritten programs available.
  • This product includes everything you need to build a robot to control using the Bot Board/SSC-32/BAP28 with our PS2 robot controller (sold separately).
  • This kit includes black anodized chassis components and brackets.
phoenblk.jpg
Part# [ PHOECA-BLK ]   $978.42 USD
Details
Add To Cart
Phoenix Combo Kit for Bot Board/SSC-32/BAP28 and PS2 Controller (Brushed)
Description -
  • Powerful Bot Board/SSC-32/BAP28; prewritten programs available.
  • This product includes everything you need to build a robot to control using the Bot Board/SSC-32/BAP28 with our PS2 robot controller (sold separately).
  • This kit includes clear anodized chassis components and brackets.
phoebru.jpg
Part# [ PHOECA-BRU ]   $978.42 USD
Details
Add To Cart
Phoenix 3DOF Hexapod (no servos, no electronics) (Black)
Description -
Included in the kit are black anodized aluminum body and leg panels, black anodized ASB-04 bracket pairs, standoffs, hardware, rubber end caps, and a wiring harness.

This basic kit does NOT include the following, which must be purchased separately:
o Electronics
o 12 x Servos, HS-645 or better, for vertical leg movement
o 6 x Servos, HS-475 / HS-485 or better, for horizontal leg movement
phoenblk.jpg
Part# [ PHOE-BLK ]   $248.90 USD
Details
Add To Cart
Phoenix 3DOF Hexapod (no servos, no electronics) (Brushed)
Description -
Included in the kit are clear anodized aluminum body and leg panels, brushed ASB-04B bracket pairs, standoffs, hardware, rubber end caps, and a wiring harness.

This basic kit does NOT include the following, which must be purchased separately:
o Electronics
o 12 x Servos, HS-645 or better, for vertical leg movement
o 6 x Servos, HS-475 / HS-485 or better, for horizontal leg movement
phoebru.jpg
Part# [ PHOE-BRU ]   $248.90 USD
Details
Add To Cart
PS2 Robot Controller
Description -
This 2.4ghz wireless Play Station 2 style controller works perfectly with any of our Bot Board / Basic Atom 28 equipped robots. Up to four of them can be used at the same time. They have a range of 10 meters, more when used outdoors. Two analog joysticks and 16 buttons available for robot control. Dual vibration motors provide tactile feedback for robots programmed with obstacle sensors.
rc01.jpg
Part# [ RC-01 ]   $19.95 USD
Details
Add To Cart
USB-to-Serial Adapter Cable
Description -
FTDI USB-to-serial adapter cable. Drivers available here. This is the fastest and most stable USB-to-serial cable available. It's made by the same place that makes the FTDI chipset and has been proven to work well with all of our products.
usb2s01.jpg
Part# [ USB2S-01 ]   $29.95 USD
Details
Add To Cart

Phoenix Specs
  • Servo motion control = local closed loop
  • Steering = omnidirectional
  • Number of legs = 6
  • Degrees of freedom per leg = 3
  • Motion speed = 10"/S
  • Height (body) = 2.00"
  • Height (overall, as in product view) = up to 5.25"
  • Width (body) = 5.88"
  • Width (overall, as in product view) = 17.00"
  • Length (body) = 7.50"
  • Length (overall, as in product view) = 14.50"
  • Weight (w/out batteries) = 3lb 10oz.
  • Ground clearance = up to 5.50"
  Sales: 309-353-1816
Support: 309-353-2777
Fax: 309-353-2775
sales@lynxmotion.com
support@lynxmotion.com
tech@lynxmotion.com
Lynxmotion, Inc. 
PO Box 818 Pekin, IL 61555-0818 
All web content © by Lynxmotion, Inc. 2009