Spur Gear Motors

   Robotic Arms
   Bipeds
   Quadrapods
   Hexapods
   A4WD1 Rovers
   Sumo Robots
   Johnny 5
   Tracked Vehicles
   Servo Erector Set
   Servos, Access.
   Mechanical
   Hardware
   Electronics
   Batteries & Supplies
   Cables
   Motors, Wheels
      Planetary Motors
      Spur Gear Motors
      Mounts / Hubs
      Wheels
   Tracks
   Robot Books
   Misc Stuff
   Software

Search:

Check out our BRAT!

Lynxmotion Wheel Calculator
A Javascript-powered calculator to find the wheel speed, motor RPM, or wheel diameter.

These motors are neutrally balanced, meaning they are designed to spin at the same RPM in either direction.

The torques listed are calculated by the manufacturer. Lynxmotion does not guarantee the suitability of these motors for any application.

Gear Head Motor - 12vdc 30:1 200rpm (6mm shaft) Description - Voltage = 12vdc RPM = 200 Reduction = 30:1 Stall Torque = 63.89 oz-in (4.6 kg-cm) Outside Diameter = 37mm Weight = 5.44 oz. Full Specs
Part# [ GHM-01 ] $21.95 USD

Gear Head Motor - 12vdc 50:1 120rpm (6mm shaft) Description - Voltage = 12vdc RPM = 120 Reduction = 50:1 Stall Torque = 123.20 oz-in (8.8 kg-cm) Outside Diameter = 37mm Weight = 5.50 oz. Full Specs
Part# [ GHM-02 ] $21.95 USD

Gear Head Motor - 12vdc 30:1 253rpm (6mm shaft) Description - Voltage = 12vdc RPM = 253 Reduction = 30:1 Stall Torque = 138.9 oz-in (10.0 kg-cm) Outside Diameter = 37mm Weight = 7.26 oz. Full Specs
Part# [ GHM-12 ] $29.95 USD

Gear Head Motor - 12vdc 50:1 152rpm (6mm shaft) Description - Voltage = 12vdc RPM = 152 Reduction = 50:1 Stall Torque = 231.5 oz-in (16.7 kg-cm) Outside Diameter = 37mm Weight = 7.28 oz. Full Specs
Part# [ GHM-13 ] $29.95 USD

Gear Head Motor - 7.2vdc 30:1 291rpm (6mm shaft) Description - External Motor Shaft for adding USDigital Encoder! Voltage = 7.2vdc RPM = 291 Reduction = 30:1 Stall Torque = 54.31 oz-in (3.9 kg-cm) Outside Diameter = 37mm Weight = 4.27 oz. Full Specs
Part# [ GHM-03 ] $21.95 USD

Gear Head Motor - 7.2vdc 50:1 175rpm (6mm shaft) Description - External Motor Shaft for adding USDigital Encoder! Voltage = 7.2vdc RPM = 175 Reduction = 50:1 Stall Torque = 99.04 oz-in (7.1 kg-cm) Outside Diameter = 37mm Weight = 4.32 oz. Full Specs
Part# [ GHM-04 ] $21.95 USD

Gear Head Motor - 12vdc 30:1 200rpm (6mm shaft) Description - External Motor Shaft for adding USDigital Encoder! Voltage = 12vdc RPM = 200 Reduction = 30:1 Outside Diameter = 37mm Weight = 4.26 oz. Full Specs
Part# [ GHM-16 ] $21.95 USD

Quadrature Motor Encoder w/Cable Description - This part has changed. It was 120cpr and is now 100cpr. Encoder = 100 cycles per revolution Encoder = 400 quadrature counts per revolution Frequency = up to 30khz Note: Cable is included. Motor and mount are not included.
Part# [ QME-01 ] $25.95 USD

Gearhead Motor Connection Wire Description - These heavy duty wires are perfect for our GHM-01 thru GHM-13 motors, and PGHM-01 thru PGHM-03. The stake-on ends push onto the motor terminals, and the other end is stripped but not tinned for screw terminal use.
Part# [ MW-01 ] $1.95 USD

Home \| What's New \| Contact \| About \| Safety \| Forum \| Account \| Shopping Cart
	Sales: 309-353-1816 Support: 309-353-2777 Fax: 309-353-2775	sales@lynxmotion.com support@lynxmotion.com tech@lynxmotion.com	Lynxmotion, Inc. PO Box 818 Pekin, IL 61555-0818 All web content © by Lynxmotion, Inc. 2009